Loctite 3D 3955 Resin 1KG

Loctite 3D 3955 Resin LOCTITE 3D 3955 is a non-halogenated material that delivers superior performance and high modulus, boasting impressive flexural and tensile properties. This material meets the UL94 V-0 standards for flammability and fulfils FST criteria (AITM2-0002, AITM2-0007, AITM3-0005), making it resilient in extreme conditions with minimal deformation due to its high Heat Deflection Temperature (HDT). Key Mechanical Properties Shore Hardness D: 82 Flexural Modulus (MPa): 4,600 Elongation at Break (%): 2 Young’s Modulus (MPa): 3,600 Tensile Stress at Break (MPa): 67 Key Benefits Fire Safety Material Halogen Free Excellent Flexural and Tensile Physical Properties   Ideal Applications HVAC Components for Aircraft Clips and Plugs for Control Systems/Cabinets Connectors, Electronic Housings Pre-Melt Requirements LOCTITE 3D 3955 BK requires pre-melt of material before use. It is recommended to heat it in the provided 1kg container at 80°C for 4 hours or until the resin is fully liquified in the container. Shake container before pouring material into tray. Pre-Melt material should be kept at 60°C to maintain fluidity and should be used within 2 weeks of melting for best results. Important Information User must wear suitable respiratory protection during cleaning process. Note: Glycol Ether TPM can be used in lieu of Loctite 3D Cleaner T Glycol Ether TPM oxidizes at elevated temperatures over time. Consult the MSDS of TPM and contact the supplier for further guidance. Use appropriate antioxidants and regularly measure peroxide concentration.